https://diyhomeideas.net/how-to-add-a-garden-sprinkler-system-to-your-yard/

The garden sprinkler system is an ideal way of keeping your plants in good health and properly hydrated. Here’s what you need to do to install one in your backyard.

The first step for adding an irrigation system for your garden to your yard is checking how many pounds of pressure will be produced from the irrigation hose. At the minimum of 30 PSI for proper operation of the in-ground sprinkler once it’s installed. Once you’ve checked the pounds of pressure in the hose you’ll need to determine what it will take to refill the receptacle using the spigot that is connected to the water source you’re employing for the sprinkler.

The following step is to gauge the surface you’d like to be able to water. Then, you’ll need to dig into a 6-to-8-inch trench. Then, insert 1 inch pipe inside the trench. Once you have it in place, cover the pipe with sheets of plastic connect the fitting to the pipe’s end. In order to prevent the contamination of the water supply through an irrigation device, make sure to install a backflow preventioner.

Once you’ve followed these steps, you’ll be all prepared to water the plants in your yard. Wish you luck and enjoy gardening!

q4iwkk396x.